How To Apply Wet-Look Sealer On Pavers

Getting Started

Achieving a wet-look finish in applying a paver sealer is an easy task to accomplish,consisting of just a few steps. The first thing you need to do is choose a wet-look paver sealer. Some things need to be considered in getting one because paver sealers vary from each other.

What Level Of Gloss Finish Are You Looking For?

Even though many paver sealers darken the paver surface to achieve the ‘wet’ look,the amount of gloss is usually different per brand. Some products produce a low-gloss finish. while the others leave a high-gloss film. Paver sealers are applied using the same method regardless of the brand you choose. Btw,if you’re looking for a pro-grade product,click this link: Paver Sealer Wet Look

Don’t Trust Everything On The Hardware Shelves

You should be wary when choosing a paver sealer on the market. Trusting a product just because a high-profile company manufactured it will likely not guarantee reliability. This is why doing a little research beforehand is highly advised.

Preparing Your Paver Surface Before Applying The Sealer

Once you’ve decided on which wet-look paver sealer to get,you need to prepare the pavers before sealing them. Make sure that the paver surface is clean and free of anything that could hinder proper bonding and penetration.

What About Stains On The Pavers?

If you decide to clean the paver surface yourself,you can try using products to help you out. Stains should be eliminated before cleaning. There are stain removers especially meant for pavers to ensure you won’t do damages to them. For those who desire to take things even further,paver prep products are available as well.

Pressure Washing Is Usally Advised

Many individuals prefer getting pressure washing services to get their pavers cleaned. After getting your paver surface cleaned,it would remain wet for some time. It is advised to let them dry for at least 24 hours.

Dry Time After Applying A Paver Sealer

However,the time it takes to dry will also be affected by the climate in your area. Individuals who experience warm climates more can expect the sealer coat to dry in less than 24 hours. On the other hand,those who live in colder areas should follow the 24-hour suggestion.

Thanks for reading this floor improvement article. If you’d like more info on beautifying pavers,indoor or outdoor,visit the author’s website at CoverTec Products